Analysis of the operating conditions of a hydraulic turbine of the bulb-type
Keywords:Preventive maintenance, dynamic test, bulb-type
In the last decades we have witnessed a technological advance and the search for 4.0 technologies, in this scenario, one of the most important topics to promote a good performance in the production of equipment is the monitoring of operation through preventive maintenance, especially for large industrial enterprises. In this article we present a dynamic test and an analysis of the operating conditions of a hydraulic turbine of the bulb-type operating with a production level of 70 MW. The results demonstrate the vibrations at different points of the equipment and the frequency of turning of the blades. Through these results it was possible to demonstrate the operating condition of the device.
BARILLI, R. J. C. Análise de Falhas em Mancais de Rolamento Utilizando a Técnica do Envelope. POLI-UFRJ, Universidade Federal do Rio de Janeiro Escola Politécnica Engenharia Naval e Oceânica. Rio de janeiro, RJ. Cap. 3, p. 8-23 2013
INMAN, D. J. Engineering vibration. 2 nd Edition, New Jersey: Prentice Hall, 560p, 2001.
FONSECA JUNIOR, M. Pré despacho de carga em usinas termoelétricas considerando a gestão da manutenção via lógica FUZZY. Tese (Doutorado) - Universidade Federal do Pará. Belém 2018.
MARTIN, H. R., Honarvar, F. Application of Statistical Moment to Bearing Failure Detection, Applied Acoustics. Vol. 44, pp. 67-77, 1995. DOI: https://doi.org/10.1016/0003-682X(94)P4420-B
MELO, Antônio. Tipos de turbinas hidráulicas aplicadas às pequenas, mini e microcentrais hidráulicas. Disponível em: http://meusite.mackenzie.com.br/mellojr/. Acesso em: 22 ago. 2020.
MITCHELL, John S. Machinery Analysis and Monitoring. Oklahoma: Penn Well Books, U.S.A., 1993, 566p.
SANTOS, P. S. B.; RAMOS, R. A. V.; FIOMARI, M. C.; WOISKI, E. R.; MORETI, T. C. F. Performance analysis of a condensation-extraction steam turbine operating in a sugar-alcohol factory cogeneration system. International Jounal For Innovation Education and Research, vol. 7(8), 2019. DOI: https://doi.org/10.31686/ijier.vol7.iss8.1675
TANDON, N. and Choudhury, A. A Review of Vibration and Acoustic Measurement Methods for the Detection of Defects in Rolling Element Bearings, Tribology International. Vol. 32, pp. 469-480, 1999. DOI: https://doi.org/10.1016/S0301-679X(99)00077-8
VASCONCELLOS R.C.; UEMORI M.; TOMAS L. A aplicação de unidades bulbo e kaplan vertical em aproveitamentos de médias potências e baixas quedas. SNPTEE. Rio de Janeiro, 2007.
YAMAMOTO, K. G. Desenvolvimento de um sistema de detecção de falhas de desbalanceamento, on-line, baseado em FPGA para aplicação em máquinas rotativas de indução. Tese (Mestrado) - Instituto Federal de Educação, Ciência e Tecnologia de São Paulo. Campinas, 2016.
How to Cite
Copyright (c) 2021 Adriano Delmaschio Cella, Maicon Maciel Ferreira de Araújo, Cléver Reis Stein
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, will not be published elsewhere in the same form, in English or in any other language, without the written consent of the Publisher. The Editors reserve the right to edit or otherwise alter all contributions, but authors will receive proofs for approval before publication.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author.